Chapter 5
|
|
Lens Replacement
Lenses are available in.
Clear
Amber
Light
Red
Dark Red
Dark Green
Dark Blue
Turquoise
|
 |
Before you re-assembly your light, clean the
top surface of the potted can and your silicone gasket.
Inspect the gasket for any cut or tears. They are pretty
durable, but may need replacing after many years of
service. |
 |
With the gasket in one hand, place the lens
under the lip of the gasket. |
 |
Begin to work your lens into the gasket by folding the
lip of the gasket up and over the lens
|
 |
You may have to stretch the last portion of the
gasket in order to get it over the final portion of the
lens. |
 |
When completed, you are ready to put the lens
onto the potted can. The lens should sit flush on the lip of
the can. You may have to adjust the bulb slightly if the
lens and gasket do not want to sit flush on the lip of the
can. |
 |
If you have power available to your light, it is a good
idea to make sure that the bulb is working before closing up
the light fixture.
CAUTION: Do Not leave the bulb on for extended
periods of time while out of the
water. | |
 |
|
|
Home Page - Order OASE Parts - Order RainJet Parts
| 
